/ Forums / Advansys Formativ / eDirectory/NDS Management / Changing Config Assignment

  • Creator
    Topic
  • #3518
    ctaleck
    Participant

    When I change a users Config objects either by putting or removing them from a group, it seems the old applets do not get removed from the cache.

    How do I ensure a user is updated in the applet cache, including ones that should no longer be assigned to them?

  • Author
    Replies
  • #5333
    Support 1
    Participant

    Thanks for your enquiry.

    You can configure the caching behavior using either of the following:

    • The Advansys Formativ applet in the Windows Control Panel. On the tab Local Config, check the box at Update Applet cache on client startup (this box is grayed out if not using Formativ Runtime).
    • The Configuration Object in eDirectory. Go to the Formativ Configuration page and check the box at Update Applet cache on client startup. See the Users Guide for details and screen shots, section Using Formativ with eDirectory | eDirectory Installation and Configuration | Step 4 – Create Formativ Objects in eDirectory | Configuration Object.

    I hope this helps you.

    Regards,
    Advansys Support

    #5332
    ctaleck
    Participant

    Yes, every one of the boxes mentioned is checked and always has been (Are these the defaults?) and I still experienced a problem. I will have to investigate further to see if the problem persists.

Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.